Imagine you’ve returned your vacuum cleaner and washed and hung the floor scrubber clean to find a sticky floor. What an inconvenience and waste of time! Sticky floors occur when you haven’t scrubbed to remove too much cleaning solution or the wrong cleaning solution. It could also be due to dirty water used to rinse the sink. This article will help you determine the causes and what cleaning process can resolve any residue left on your sticky floor.

Why Do I Have A Sticky Floor After I’ve Mopped It?

There are three main reasons floors become sticky after a wet scrubber.

Using The Wrong Cleaning Product

Sometimes you can soak your scrubber in a scrubber bucket of clean water, and you’re good to go. However, there are some cases where you need a cleaning solution to remove the stain or disinfect the entire floor. Suspending dirt means using concentrated cleaners to achieve cleaner floors.

There are different styles of flooring types, laminate flooring, vinyl, ceramic tile, natural stone, wooden flooring, and many more. These are usually the types that need cleaning chemicals where there is soap scum or any sticky residue.

If it’s greasy and sticky, this is the part that needs stronger chemicals. Some cleaning products can remove some dirt, but leave behind a sticky residue. Often this results from the inappropriate chemical used to clean the floor. You can always ask the store for recommendations if they know the compatible cleaning product.

There are cleaning solutions that work for tiles, but on any wooden floor, they leave behind sticky floors and can also defame the quality of the floor.

Using An Excessive Amount Of Cleaning Solution

It is a myth that the more cleaning chemical, the cleaner your wood or laminate floors will become. Too much cleaning solution will give you the opposite result. To clean sticky floors, you must always be exact in following what is written on the label of cleaning solutions. When you feel you’ve added more than you should, you’ll see soap scum.

You don’t have to worry as much because most cleaning agents have measuring cups, so you can always stick to the recommended amount.

Use Dirty Water

The third reason for a sticky floor is using dirty water in the same bucket of water, especially if you have laminate or tiled flooring. The best solution is to replace the dirty water with clean water whenever you see it getting dark and debris floating, or sometimes all of it is visible in the bottom of the scrubber bucket.

This is to prevent dirt from being transferred from the water to the ground. The scrubber will repeat the same damaging cycle if you submerge the scrubber in the same water. Remove dirty water separately while cleaning floors so we do not waste your cleaning efforts.

Use clean water to rinse everything when you are done cleaning the floor. You know what clean and dirty water looks like; always replace it to remove sticky residue.

If you feel like it’s a little challenging, use steam scrubbers or microfiber scrubbers as we know them to absorb dirt better. They can hold the land longer and not throw it into the water. You can also look for the type that automatically separates cleanly from dirty water. This will help you clean faster if you buy this scrubber.

How To Get Rid Of Sticky Floors After Mopping?

Since you now have a clear idea of ​​what causes floors to feel sticky, here are our suggestions on how you can resolve this situation and remove the stickiness afterward.

Fill a bucket with fresh water; about a gallon is good, plus a cup of white vinegar. It doesn’t matter if you use a traditional mop to cover the entire floor.

A microfiber mop is always the way to go! Some say they work much better at tackling sticky floors than what you’re used to, a traditional scrubber, and they can reduce bacteria.

You can remove sticky residue by using a floor cleaner with the opposite pH of the soil in question. For example, an acidic surface cleaner is much better at removing alkaline soil than using a primer to clean a primer. Unfortunately, you can’t use the same pH levels as this results in what you’re trying to avoid: sticky soils.

Be very careful when cleaning hardwood floors, as they are not compatible with over-saturated scrubbers. We suggest spinning your scrubber well enough until you feel a damp towel.

Another type should be quickly dried with a soft towel after scrubbing. If there are still sticky floors after mopping, you can combine half of the non-ammonia cleaner with white vinegar or a water solution and spray directly on the floor.

How Can You Prevent Sticky Floors From Appearing In The Future?

Floor cleaners are always available, but taking precautionary measures is always better than finding solutions to problems. So, note the tips that work well for your soil so that you can prevent sticky soil from occurring.

Second, the way to protect your laminate flooring from sticky floors in the future is to find the right cleaning chemical. It’s gratifying to not only see your floor spotlessly clean but also to know that the materials are protected.

Why Are My Wooden Floors Sticky?

Someone may still confuse some of you about how to solve sticky floors after scrubbing your hardwood floor. It is inconvenient to walk in the noisy and sticky feeling, and sometimes they may feel sticky.

You no longer have to worry about maintaining the type of wood flooring or how to clean it. Here are at least three ways to get rid of sticky areas.

Choose A Specific Product For Hardwood Floors

Compatibility is the key to cleaning and carefully following the instructions on the label. Ask the store for recommendations.

Have You Tried Using Dish Soap?

For some, trying mild dish soap seals the deal on sticky residue on hardwood floors. Instead, look for a dish soap with a neutral pH level. Also, look for a concentrated plant-based product. Finally, mix a quarter of the dish soap and warm water to serve as a cleaning agent.

 Use Vinegar Carefully

 The only drawback is that vinegar can dull the floor a bit, but it can effectively clean sticky floors after mopping. Mix 1/2 cup of this solution with 1 gallon of warm water and use a non-abrasive scrubber or cloth to squirt into a spray bottle or mix directly into a bucket.

SCS Group Integrated Services Cares About Your Floors

The services of Sydney cleaning companies, moving cleaning, house cleaning, office cleaning, portal cleaning, and all our cleaning services in Sydney include guaranteeing the cleaning and care of your floor. We scrub and scrub stairs, baseboards, and all flooring with careful consideration of the type of flooring in your property.